1, fiberglass anticorrosive board must use a good waterproof gasket, between the screw and anticorrosive board, in order to achieve the role of waterproof and dustproof.
2, it in the longitudinal lap position must be affixed with two double-sided tape, in order to achieve waterproof function.
3. The fiberglass anticorrosive board must be placed with double-sided tape above the truss to avoid direct friction between the anticorrosive board and the truss.
4. The diameter of the borehole shall be 50% larger than the fixed diameter for expansion by heat and contraction by cold.
Plate, glass fiber reinforced plastic anti-corrosion plate and adopted by lap, after its anti-corrosion plate should cover on the top of the plate, it is very important, many users at the time of operation, occasionally ignored this step, because the two products performance and usage are slightly different, so at the time of installation, be sure to consider the performance and usage, so as to make our products have good effect.